Restore-A-Garage Epoxy 1.5 Gallon

1 Rating
$249.95
free shipping with ground services
Restore-A-Garage Epoxy Coating is ideal for all concrete types such as garage floors, warehouse floors, industrial floors, shop floors, basements, concrete patios, concrete countertops, wood, and metal.
Color
 Back to: Restore-A-Garage Epoxy Coatings

Do-It-Yourself Epoxy Coatings Made Simple!

Restore-A-Garage is an advanced, Concrete Epoxy Floor Coating System used for maximum protection and longevity. Restore-A-Garage Epoxy Coating is a 100% solid, high build garage floor epoxy coating that undergoes a chemical reaction that results in a thick coating, tightly bonded to the prepared surface. Restore-A-Garage Epoxy Coating will protect against abrasions, stains, impact, and chipping AND IS resistant to moisture, dirt, chemicals, and salts making it ideal for those living in climates where rain and snow are common as the seasons change.

WHERE TO USE

Restore-A-Garage Epoxy Coating is ideal for all concrete types such as garage floors, warehouse floors, industrial floors, shop floors, basements, concrete patios, concrete countertops, wood, and metal.

ADVANTAGES 

  • High Performance 100% Solids Resin-Based Epoxy Coating
  • Can be applied to concrete, wood and metal surfaces
  • Available in Multiple Colors
  • Decorative Fleck can be added
  • High Gloss Finish
  • Low VOC content
  • Restore-A-Garage Professional Epoxy Coatings
  • Dries to a rich finish
  • Water-based

Coverage:

  • One Coat except 2 coats recommended for Beige, White & Yellow colors.
  • 1.5-Gallon Epoxy Kit coverage 190-240 sq. Ft. at 10 mils dft (dry film thickness)

For Full Instructions, See Restore-A-Garage Epoxy Product Data Sheet

Color Chart and Floor Measurement Chart Below for the Restore-A-Garage Epoxy

Note: 2 coats recommended for Beige, White & Yellow colors. All other colors are 1 Coat.

Restore A Garage Epoxy Color Chart

Epoxy Garage Floor Measurement Chart

For Full Instructions, See Restore-A-Garage Epoxy Product Data Sheet

RESTORE-A-GARAGE EPOXY TIP SHEET

  1. Do not apply if the temperature is below 55° F or above 85° F.
  2. All prior coatings must be removed or grinded off to adhere properly.
  3. Apply only when temperature and humidity is at their lowest point of the day. Avoid hot direct sunlight.
  4. You must wait at least 30 to 60 days for new concrete to cure.
  5. The Epoxy material should be at 70° F to 75° F before using it.
  6. No water or rain for at least 48 hours after applying.
  7. No car traffic within the first 48 hours after applying.
  8. Be sure to fill all large cracks, holes, and depressions prior to applying.

COVERAGE:

One Coat except 2 coats recommended for Beige, White & Yellow colors.

3-Gallon Epoxy Kit coverage 380-480 sq. Ft. at 10 mils dft or 240 sq. Ft. At 20 mils dft (dry film thickness)

1.5-Gallon Epoxy Kit coverage 190-240 sq. Ft. at 10 mils dft or 240 sq. Ft. At 20 mils dft (dry film thickness)

DRY/CURE TIME:

A complete cure of the Epoxy coating is 24 to 48 hours at 65º F and less than 50% humidity. Do not close the garage door, walk on, or drive on until fully cured. Temperatures lower than 75° will result in longer cure times.

CLEANUP:

Clean tools immediately after each use with soap and water.

Reviews

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Lou · 03/25/2022
    Hi Im looking for a white base with black accents for a white marble look, do you have something like that?
  • We will reply to your comment shortly
    Brad · 11/30/2021
    I have a closet on the first floor of a slab house.  I would like to epoxy the closet floor.  Currently it has linoleum where moisture from the concrete has seeped up and caused the linoleum to discolor.  The concrete under the linoleum is clean and never had adhesive on it.  It would not be possible to use your cleaner and then hose it off after.  Would it be OK to just sweep the concrete and then put the epoxy on it?  Since it is an inside closet how bad would the epoxy smell until it is dried (24 hours right)?  Would like to know if we would have to vacate the house while it dries.
    • We will reply to your comment shortly
      RAD Products · 12/01/2021
      No. you will need to etch or grind the surface. Also, if the concrete is still leaching moisture, this will be bad for the epoxy. There is an odor but it is water-based so not extremely strong. Can linger for a few days.
  • We will reply to your comment shortly
    Bre · 09/23/2021
    What is the thickness ?
    • We will reply to your comment shortly
      RAD Products · 09/23/2021
      1.5-Gallon Epoxy Kit coverage 190-240 sq. Ft. at 10 mils dft (dry film thickness)
  • We will reply to your comment shortly
    John · 09/22/2021
    I am interested in doing a laundromat. Do you know how soon I could reinstall equipment after application?
  • We will reply to your comment shortly
    Chuck · 05/06/2020
    Garage is 24 x 24 - I want to do a French or Dark Grey with Flakes. I've attached a few photos it looks like it has some type of sealer on it that will have to come off. Would it be best to get two 3 Gal 1.5 Gal kits instead of two 3 gallon kits.