Restore-A-Garage Clear Top Coat

1 Rating 1 Shopper Review

$189.95

Use Restore-A-Garage Clear Top Coat as a finish or top coat over the Restore-A-Garage Epoxy Coating. Restore-A-Garage Clear Top Coat exhibits excellent characteristics for abrasion resistance, chemical resistance, corrosion resistance, weather resistance, flexibility, and excellent UV stability.

Back to: Restore-A-Garage Epoxy Coatings

Do-It-Yourself Concrete Coatings Made Simple!

Restore-A-Garage Clear Top Coat is a ZERO VOC high performance 61% solids 2-component, waterborne aliphatic poly aspartic polyurethane. This unique non-yellowing coating comes in a GLOSS or SATIN finish that remains non-chalking and has superior UV resistance. Restore-A-Garage Clear Top Coat offers performance characteristics typical of high quality, 2-component, solvent-based, aliphatic urethane coatings but provides excellent durability and UV stability without strong odors.

Note: The Restore-A-Garage Clear Top Coat can also be used on bare concrete.

WHERE TO USE

Restore-A-Garage Clear Top Coat is ideal for a top coat over existing coatings and epoxies for all concrete types such as garage floors, warehouse floors, industrial floors, shop floors, basements, concrete patios, concrete, and countertops.

ADVANTAGES

High Performance 61% Solids Resin-Based Coating
Can be applied immediately after or months after your current epoxy application
High Gloss or Satin Finish
Zero VOC content
Provides excellent coverage, clarity and UV resistance
For indoor and outdoor use
Water-based
The R-A-G Clear Top Coat will self-level and provide a beautiful smooth finish with added protection to the R-A-G Epoxy

Coverage:

1 Gallon R-A-G Top Coat Kit covers 210-400 sq. Ft. at 6-7 mils

Important Note: When applying the R-A-G Clear Top Coat over the Restore-A-Garage Epoxy Coating, we suggest lightly sanding the Epoxy coating with 100-120 grit sanding blocks/pads after it is fully dry. This will de-gloss the epoxy, create a good Epoxy surface profile and provide excellent adhesion for the R-A-G Clear Top Coat. You can avoid sanding by applying it 15-18 hours after applying the epoxy, but you risk the small chance of the R-A-G Clear Top Coat separating from the R-A-G Epoxy.

For Full Instructions, See Restore-A-Garage Clear Top Coat Product Data Sheet

Restore-A-Garage Clear Top Coat in Gloss

Restore A Garage Clear Top Coat

Restore-A-Garage Clear Top Coat in Satin

Restore-A-Garage Clear Top Coat Satin

For Full Instructions, See Restore-A-Garage Clear Top Coat Product Data Sheet

COVERAGE:

1-Gallon Clear Top Coat Kit covers 210-400 sq. Ft. at 4-7 mils

DRY/CURE TIME:

A complete cure of the Clear Top Coat is 24 to 48 hours at 65º F and less than 50% humidity. Do not close the garage door, walk on, or drive on until fully cured. Temperatures lower than 75° will result in longer cure times.

CLEANUP:

Clean tools immediately after each use with soap and water.

Reviews

Thursday, 16 January 2020

Adds additional protection and gloss over your epoxy coating. Can be used as maintenance coats to restore the shine and while allowing your epoxy coating to look brand new again.

RAD Products