MasonrySaver No Rinse Concrete Etch

0 Rating
$69.00
.
 Back to: Restore-A-Garage Prep Products
MasonrySaver No-Rinse Concrete Etch - No need to rinse or neutralize prior to applying a stain or sealer

MasonrySaver® No-Rinse Concrete Etch is a hydrofluoric acid-etching material designed for etching concrete or other masonry surfaces prior to coating or sealing. A thin film of Etch will etch any concrete surface in 15 seconds. After using MasonrySaver® No-Rinse Concrete Etch, a stain or protective coating such as Epoxies may be applied directly over the etched surface once the substrate has completely dried.
 
Product Uses:
Use MasonrySaver® No-Rinse Concrete Etch to etch concrete, brick, or masonry surfaces prior to coating.
 
Product Benefits:
  • Etches all concrete, stone, tile, or brick surfaces
  • Only generates the etching compound upon evaporation and contact with SiO2 or metal oxide
  • Doesn’t require neutralization or rinsing
  • Saves time - apply sealers or stains within hours instead of days
Coverage:
200-400 square feet per gallon on concrete. Coverage rates will vary based on the porosity of the substrate.

Reviews

There are yet no reviews for this product.

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.

Be the first to comment.